Filter Holders for Membranes
Description and Use
- 13 mm - Filter Holder Swinney
- 25 mm - Filter Holder - Polypropylene
- 47 mm Filter Holder Polypropylene
- 47 mm Gravi-Seal Analytical Filter Holder
Product Information – Product Selection Guide
| Specifications | 13 mm | 25 mm | 47 mm | |
| Materials | Celcon (acetal copolymer) | Acrylic - body & support | Polypropylene - body & support | |
| O-rings | PTFE | Silicone | Silicone | |
| Filter Size | 13 mm | 25 mm | 47 mm | |
| Prefilter Cap size | 10 mm | 22 mm | 42 mm | |
| Filtration Area | 0.8 sqcm | 3.5 sqcm | 13.5 sqcm | |
| Diameter | 16 mm (0.6 in) | 30 mm (1.2 in) | 63.5 mm (2.5 in) | |
| Height | 35 mm (1.4 in) | 30 mm (1.2 in) | 50 mm (2.0 in) | |
| Maximum Liquid Temperature | 80°C (176°F) | 80°C (176°F) | 80°C (176°F) | |
| Maximum Operating Pressure | 2.8 bar (40 psi) | 2.9 bar (42 psi) | 1.9 bar (71 psi) | |
| Autoclaving | 15 minutes at 121°C (250°F) and 15 psi | 20 minutes at 121°C (250°F) and 15 psi | 20 minutes at 121°C (250°F) and 15 psi | |
| Connections, Inlet | Female Luer Lock | Female Luer Lock | 1/4 inch NPTM, Female Luer Slip | |
| Connections, Outlet | Male Luer Slip | Male Luer Slip | 1/4 inch NPTM, Female Luer Slip | |
| Shipping Weight | 20 g (0.7 lb) | 20 g (0.7 lb) | 470 g (1.1 lb) |